Pearl Plaster by Artisan Enhancements® creates an opulent and luxurious pearly finish. Once applied, the finish will resemble velvet with a shimmering pearlescent vibrancy. Pearl Plaster is a low VOC coating that will adhere to any properly base coated and prepared surface. It cleans up easy with soap and water.
Pearl Plaster is formulated for use on base coated walls and furniture.
Mix product thoroughly before use. Pearl Plaster can be painted, trowelled or rolled on for different results. It can be dry brushed, mixed with paint to be tinted (although it will still be opaque) or pushed through a stencil. You can wax over Pearl Plaster or just use Clear Topcoat (or both). Pear Plaster can also be thinned. As you brush on the product spritz with water as you go and it will give you a smoother effect.
If applying on a wall…. apply a skim coat with trowel or brush directly on surface. If using a trowel, place material on edge of at a 45°angle and cover entire area. Work material from wet to dry area. Once first coat has properly dried, repeat the process. As material starts to setup, smooth down with trowel to obtain velvet effect.
Seal container tightly and do not let freeze or expose to direct sunlight or extreme heat. Do not apply product when air and surface temperatures are below 50°F (10°C).